E-610 压电放大器/控制器

具有可选位置伺服控制的单通道OEM压电驱动器模块

经济实用型单通道OEM解决方案
闭环和开环版本
陷波滤波器可实现更高带宽
带应变片或电容式传感器的位置控制
峰值电流为180毫安

OEM modules for low-voltage piezo actuators

E-610 amplifier / servo controller modules are designed for operating low-voltage piezo actuators and positioning systems. They are equipped with an integrated low-noise piezo amplifier that can input and output peak currents of 180 mA in the low-voltage range. Three versions are available: E-610.00 (amplifier only) as well as the E-610.S0 and E-610.C0 versions with additional components for control as well as measuring the position. The E-610.S0 was designed for piezo mechanics with strain gauge positioning sensors and the E-610.C0 for systems with capacitive sensors.

Closed-loop and open-loop piezo positioning

The E-610 modules offer precision control of piezo actuators and piezo positioning systems both in closed-loop and voltage-controlled operation. The piezo controllers already have electronics for position sensing and position control. The control signal controls the piezo position directly. Therefore, positioning accuracy and repeatability is possible in the nanometer range, depending on the piezo mechanics and the sensor type.

Control via PC

The E-621 and E-625 models are available for control via a digital PC interface. Alternatively, analog control from the PC is possible via D/A converter. PI offers a full LabVIEW driver set for certain D/A converter boards from National Instruments.

规格

数据表E-610

版本/日期
2018-03-01
版本/日期
2018-03-01
文件语言
pdf - 298 KB
pdf - 301 KB

图纸/图片

[Translate to Chinese:] An OEM version with a digital controller is available – the E-609
[Translate to Chinese:] PI E-610 Diagram

报价/订购

所需数量、价格和供货周期请求免费报价或描述您所需的改型。所有线上有货的产品均可直接订购。

兼容产品

下载

数据表

数据表E-610

版本/日期
2018-03-01
版本/日期
2018-03-01
文件语言
pdf - 298 KB
pdf - 301 KB

文件

用户使用手册PZ72

E-610.C0压电控制器/放大器(OEM)
版本/日期
2006-11-30
文件语言 English
pdf - 506 KB

用户使用手册PZ70

E-610.S0、E-610.L0、E-610.00压电控制器/放大器(OEM)
版本/日期
2010-02-16
文件语言 English
pdf - 607 KB