P-721 PIFOC压电陶瓷柔性铰链物镜扫描器

用于显微镜物镜的快速纳米定位器和扫描仪

P-721 PIFOC压电陶瓷柔性铰链物镜扫描器
产品描述 规格 下载 报价/订购
  • 用亚纳米级的分辨率扫描和定位物镜
  • 行程达140微米、毫秒级稳定时间
  • 与机动化Z向位移台相比,具有明显更快的响应和更长的使用寿命
  • 实现更佳聚焦稳定性的平行高精度柔性铰链导向
  • 带电容式传感器的直接计量可实现最佳线性度
  • 带应变片传感器的经济实用型版本
  • 与MetaMorph成像软件兼容
  • PICMA压电陶瓷促动器带来超长使用寿命
  • QuickLock螺纹适配器可实现便捷连接
  • 通光孔径达Ø29毫米

Fields of application

  • Super-resolution microscopy
  • Light disc microscopy
  • Confocal microscopy
  • 3-D imaging
  • Screening
  • Interferometry
  • Measuring technology
  • Autofocus systems
  • Biotechnology
  • Semiconductor tests

Outstanding lifetime thanks to PICMA® piezo actuators

The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.

Subnanometer resolution with capacitive sensors

Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.

High guiding accuracy due to zero-play flexure guides

Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They are 100 % vacuum compatible and work in a wide temperature range.

Automatic configuration and fast component exchange

Mechanics and controllers can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the Sub-D connector of the mechanics. The autocalibration function of the digital controllers uses this data each time the controller is switched on.

Maximum accuracy due to direct position measuring

Motion is measured directly at the motion platform without any influence from the drive or guide elements. This allows optimum repeatability, outstanding stability, and stiff, fast-responding control.

规格

Datasheet P-721

版本/日期
2018-04-16
版本/日期
2018-04-16
文件语言
pdf - 1 MB
pdf - 1 MB

下载

数据表

Datasheet P-721

版本/日期
2018-04-16
版本/日期
2018-04-16
文件语言
pdf - 1 MB
pdf - 1 MB

文件

技术说明P721T0007

P-721快速PIFOC®压电陶瓷纳米级Z驱动器
版本/日期
2017-03-29
文件语言 English
pdf - 1 MB

技术说明P721T0002

P-721、P-725 PIFOC®快速锁定线程选项
版本/日期
2017-03-29
文件语言 English
pdf - 2 MB

3D模型

P-721 STEP

版本/日期
---

报价/订购

所需数量、价格和供货周期请求免费报价或描述您所需的改型。所有线上有货的产品均可直接订购。

P-721.CDQ
快速PIFOC压电陶瓷纳米级聚焦Z向驱动器、100微米行程、直接计量、电容式传感器、Sub-D连接器、用于QuickLock螺纹适配器
P-721.CLQ
快速PIFOC压电陶瓷纳米级聚焦Z向驱动器、100微米行程、直接计量、电容式传感器、LEMO连接器、用于QuickLock螺纹适配器
P-721.CDA
快速PIFOC压电陶瓷纳米级聚焦Z向驱动器、100微米行程、直接计量、电容式传感器、Sub-D连接器、用于大孔径QuickLock螺纹适配器
P-721.SDA
快速PIFOC压电陶瓷纳米级聚焦Z向驱动器、100微米行程、应变片传感器、Sub-D连接器、用于大孔径QuickLock螺纹适配器

询问工程师

通过电子邮件或电话从当地PI销售工程师处快速获取解答。