用于线性、力矩、步进和直流伺服电机的运动控制器和驱动器

为了满足驱动器和应用的要求,PI自主研发运动控制解决方案,以对产品特性做出最佳调整。

PI运动控制器一般为单通道或多通道设备,可为台式、机架式安装或OEM版本。标准六足位移台控制器可提供对两个直流电机轴的额外运动控制。

 

标准六足位移台控制器可提供对两个额外直流电机轴的运动控制。

 

用于PIMag®磁性线性和力矩电机

G-901 Motion Controller for High Power Requirement

采用交流伺服电机、直流电机、音圈电机、步进电机的集成驱动器,最多可驱动4根驱动轴

G-910.RC01 • RC03 ACS Driver Module for Low Power Requirement

For 2 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

G-910.RC02 Motion Controller for Low Power Requirement

Integrated Driver for up to 2 Axes, EtherCAT Master for Synchronizing up to 4 Axes
  • Fully integrated solution with ACS motion controller and ACS driver module for 2 axes in a compact housing, directly compatible with positioners from PI.

C-891.130300 PIMag® Motion Controller for Magnetic Direct Drives

单轴,用于三相线性电机

A-82x 用于4、6或8轴的PIglide运动控制器

用于带直接驱动、具有高功率要求的平台,TCP/IP接口

A-81x 用于1、2或4轴的PIglide运动控制器

用于带直接驱动、TCP/IP接口的平台

C-413 PIMag®运动控制器

力、位置和速度的控制

用于直流和无刷直流(BLDC)伺服电机

新产品

G-902.RxI ACS Driver Module

For 4 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor
  • ACS driver module for 4 drive axes, as benchtop device or control cabinet module, directly compatible with positioners from PI.
新产品

G-902.RxE Motion Controller

Integrated Driver for up to 4 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor
  • ACS motion controller with integrated ACS driver for 2 or 4 drive axes, directly compatible with positioners from PI.

G-901 Motion Controller for High Power Requirement

采用交流伺服电机、直流电机、音圈电机、步进电机的集成驱动器,最多可驱动4根驱动轴

G-910.RC01 • RC03 ACS Driver Module for Low Power Requirement

For 2 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

G-910.RC02 Motion Controller for Low Power Requirement

Integrated Driver for up to 2 Axes, EtherCAT Master for Synchronizing up to 4 Axes
  • Fully integrated solution with ACS motion controller and ACS driver module for 2 axes in a compact housing, directly compatible with positioners from PI.

A-82x 用于4、6或8轴的PIglide运动控制器

用于带直接驱动、具有高功率要求的平台,TCP/IP接口

A-81x 用于1、2或4轴的PIglide运动控制器

用于带直接驱动、TCP/IP接口的平台

C-884.4DC • C-884.6DC 用于直流电机的运动控制器,4或6轴

用于带闭环直流电机的定位器,USB,RS-232,TCP/IP,SPI,输入/输出,手柄

C-887.52x 六足位移台运动控制器

用于控制六轴系统的紧凑型台式装置

C-887.53x 带EtherCAT®的六足位移台运动控制器

通过现场总线接口控制六轴定位系统

C-863 Mercury伺服控制器

单轴,用于直流电机和PWM电机驱动器

C-863.20C885 用于C-885PIMotionMaster的直流电机控制器模块

用于直流电机和无刷直流电机,2轴

用于步进电机

G-901 Motion Controller for High Power Requirement

采用交流伺服电机、直流电机、音圈电机、步进电机的集成驱动器,最多可驱动4根驱动轴

G-910.RC01 • RC03 ACS Driver Module for Low Power Requirement

For 2 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor

G-910.RC02 Motion Controller for Low Power Requirement

Integrated Driver for up to 2 Axes, EtherCAT Master for Synchronizing up to 4 Axes
  • Fully integrated solution with ACS motion controller and ACS driver module for 2 axes in a compact housing, directly compatible with positioners from PI.

C-663.12C885 Mercury Step步进电机控制器模块

用于C-885PImotionMaster模块化控制器系统

C-663.12 Mercury Step步进电机控制器,1轴

用于闭环和开环操作,HD Sub-D 26针,48伏